T H Sensor
OneVue Compatible Available for OneVue

OneVue Sense Temperature and Humidity Sensor

Facility managers must constantly monitor indoor air quality in order to properly store medication, protect their staff and maintain isolation room integrity. Our OneVue Sense Temperature and Humidity Sensor (formerly known as PrimexIAQ Series Sensor) consolidates this monumental task to a single, easy-to-use solution.

Questions? Call 262-729-4858 to speak with a Primex representative.

Sense Temperature and Humidity Sensors monitor air quality without bogging down your Wi-Fi network, providing unmatched safety with minimal impact.

Sense Temperature and Humidity Sensors can help minimize the impact on your IT network with 802.11n network load - and is also 802.11b/g compatible. The sensors feature authentication protocols that meets today’s stringent security and network authentication requirements and encryption protocols, including WEP, WPA, WPA2 and HTTPS.

  • Alerts are initiated when conditions stray out of custom-programmed ranges
  • LCD display shows temp/humidity readings and sensor diagnostic at the device
  • Available with two power options: Battery or AC with back-up batteries to protect data in case of power loss


Dimensions 4.7” H x 3.7” W x 1.3” D (11.93cm x 9.39cm x 3.30cm)
Weight 0.3lbs (136 gram) with 2AA batteries
Operating Temperature 32F to 122F (0C to 50C)
Data Packet Size < 5kB
Battery Power 2 AA 1.5V batteries
FDA Registered 21 CFR Part 11 compliant

Part Numbers

OneVue Components

A100Q (temperature and humidity sensor)
S100PWR (AC adapter)
Q13827 (AC adapter extension 6' [1.8M])
SNS900 (battery pack replacement)